STAGING COPY: email, payments, form delivery and tracking are off. This is not the live site.
Building F, Bell Recreation Center Monday to Saturday, 8 am to 4 pm (623) 974-8206

The fiber laser

New to the club in 2026. Draw a design, bring it on a USB stick, and watch the laser cut it out of steel through the window in its door.

The club's RayTools XC3000 fiber laser: a red and black enclosed cabinet with a viewing window, a control screen and a keyboard on the left.
The club’s RayTools XC3000 fiber laser, with a 4 by 4 foot cutting bed.

Specifications

Cutting bed
48 by 48 inches
Sheet size
12 by 12 inches up to 48 by 48
Thickness
14 to 20 gauge steel
Assist gas
Nitrogen for thin sheet; oxygen for 1/8 inch and up
Laser
RayTools XC3000
Software
2d Cut
Your file
A DXF on a USB stick

Why learn the laser

Laser cuts have no slag, so laser-cut metal can go straight to the shear.

Setting the cut order takes two clicks: the software cuts inside shapes before outlines. Club material cuts cleanly without lead-in lines.

Getting certified

The laser has its own qualification. New to drawing parts on a computer? Take the CNC drawing class first.

  1. Read the manual

    Read the safety section before your first session.

  2. Hands-on training

    You must be trained before operating the laser.

  3. Competency sign-off

    The sign-off sheet is posted at the machine.

  4. Sign out the key

    At the monitor station. Every cutter signs out the key personally.

A cut, start to finish

  1. Start up

    Main power, fans, compressor, then the laser and the 2d Cut software.

  2. Load your sheet

    Check the gauge, then set it on the bed. Never trim metal to size on the laser.

  3. Load your design

    Import the DXF from your USB stick and pick the material and thickness from the list.

  4. Check the nozzle and gas

    The job tells you which nozzle size it needs. Finger-tight only.

  5. Set the zero and check the frame

    Edge Seek finds the sheet, and the frame check makes sure nothing runs off the edge.

  6. Cut

    Door closed, and stay at the window with a finger over Pause.

  7. Finish

    Pull your parts, clear your program, eject your USB stick, then hand off or shut down.

A magnetic pickup tool lifting a laser-cut rabbit out of a steel sheet on the laser's slatted bed.
Lifting a finished part off the bed with the medium magnet.

Never cut galvanized, zinc-plated, painted or oiled metal unless it’s in the software’s material list. The fumes are hazardous to breathe.

Treat cut parts as hot, especially after an oxygen cut, and the edges as sharp.

Manual and video